Longitudinal horizontal bar should be set up on the inside of the pole Fuzhou Bowl scaffolding, its length should not be less than 3 cross, longitudinal horizontal bar can be docking fastener Fuzhou door scaffold, may also overlap. Such as the use of docking fastener method, docking fastener should be staggered; such as the use lap joint, lap length of not less than 1 m, and should equally spaced three rotating fastener fixed. Scaffolding master node (ie pole, vertical horizontal bar, horizontal bar three buckle close contact) must be set at a right angle with the horizontal bar and do not remove the snap fastener. Two center right angle fasteners from the primary node should not exceed 150mm. When the scaffold board length is less than 2m, can be supported by two horizontal bar Fuzhou steel scaffolding, scaffold boards but should be fixed at both ends of its reliable scaffolding to prevent tipping. Wide bamboo fence bamboo scaffold boards should be its main ribs perpendicular to the longitudinal direction of laying horizontal bar and butt tile, apply the four corners of galvanized steel wire fixed longitudinal horizontal rod. Each pole should be set at the bottom of the base or pad. Scaffolding must be set vertical and horizontal sweep shot. Vertical sweep shot should be at right angles from the base fastener fixed on the epithelium of not more than 200mm at the pole. Lateral sweeping rod fasteners should be fixed at right angles close to the vertical sweep shot underneath the pole. _ _ Scaffolding steel scaffolding Fuzhou, Fuzhou, Fuzhou Meiko Meiko scaffolding provided by the steel frame construction projects Leasing Limited. Fuzhou Mingguang steel frame construction projects Leasing Co., Ltd. (www.fzmgjsj.com) strong, credible, Fuzhou in Fujian site construction materials industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Fuzhou Mingguang Scaffolding and you hand into the brilliant, for a better future!