Longitudinal horizontal bar should be set up on the inside of the pole, and its length should not be less than three across, vertical horizontal bar can be docking fastener Fuzhou scaffolding rental company, may also overlap. Such as the use of docking fastener method, docking fastener should be staggered; such as the use lap joint, lap length of not less than 1 m, and should equally spaced three rotating fastener fixed. Scaffolding master node (ie pole, vertical horizontal bar, horizontal bar three buckle close contact) must be set at a right angle with the horizontal bar and do not remove the snap fastener. Two center right angle fasteners from the primary node should not exceed 150mm. 12, on the ground of the requirements, the foundation does not usually use to weigh the base foot to reach equilibrium. The foundation must have the ability to withstand the pressure of the scaffolding and work. 13 staff work at height must be set up and tied with belts Fuzhou scaffolding for sale around the work area, install a safety net to prevent the weight falling scaffolding Fuzhou, injured others. 14, scaffolding components, accessories prohibited in the transport, storage process serious fall, hit; lap, when disassembly is prohibited thrown from a height, should be removed from the top down in order to operate. Fuzhou scaffolding sale, scaffolding Fuzhou, Fuzhou, Fuzhou Mingguang Mingguang scaffolding provided by the steel frame construction projects Leasing Limited. Fuzhou Mingguang steel frame construction projects Leasing Co., Ltd. (www.fzmgjsj.com) strong, credible, Fuzhou in Fujian site construction materials industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Fuzhou Mingguang Scaffolding and you hand into the brilliant, for a better future!