2. The steel pole bracket template structure should meet the following requirements: (1) shall be provided at the bottom of each pole base or pad. (2) must be set vertical and horizontal sweep shot. Vertical sweep shot should be fixed on the pole right angle fasteners scaffolding from the base distance of not more than 200mm; transverse sweep shot right angle fasteners should be fixed at the bottom of the pole next to the vertical sweep shot. When not at the same height on the basis of the pole when scaffolding rental company in Fuzhou, must be the height of the vertical sweep shot to the lower extension of two cross and Fuzhou scaffolding pole fixed lease, the height difference should be less than 1m. Distance from the axis of the slope by the pole to the top of the slope should be greater than 500 mm. (5) should stand upright pole, 2m vertical height tolerance of 15mm. (6) provided in the base of the pole bracket adjustable stand, when in its extended length exceeds 300mm, measures should be taken to reliably fixed. (7) when the beam formwork support pole with single pole, the pole should be located in the beam centerline of the template, its eccentricity should not exceed 25mm. 3. Full support bracket scaffold template settings should meet the following requirements: Fuzhou scaffold rental, scaffolding, scaffolding provided by Fuzhou Fuzhou Mingguang Mingguang steel frame construction projects Leasing Limited. Fuzhou Mingguang steel frame construction projects Leasing Co., Ltd. (www.fzmgjsj.com) strong, credible, Fuzhou in Fujian site construction materials industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Fuzhou Mingguang Scaffolding and you hand into the brilliant, for a better future!