Fourth, the structural requirements (a) Pole bracket template structure should meet the following requirements: 1. the bottom of the base of each pole should be set and must be set according to the relevant provisions of the longitudinal, swept to pole. 2. High formwork pole pitches may not be greater than 1.5m, and should be set vertical and horizontal level lever. 3. The pole must be used to take a long docking fastener connection according to relevant regulations. 4. The stand upright pole should be set up, 2m vertical height tolerance of 15mm. 5. When the beam when the template bracket pole with single pole scaffold where Fuzhou, the pole should be located at the center line of the beam template, its eccentricity should not exceed 25mm. 1. Remove the site must set the warning area, put up eye-catching warning signs. Within the warning area non-passage or non-steered staff continue to organize under the scaffold construction. Ground care staff must perform their duties. High-rise building scaffolding removed scaffolding, it should be equipped with excellent communications devices. 2. Double check for lifting machinery (including rigging) is safe and reliable. Lifting machinery does not allow the erection of the scaffolding should separate settings. 3. In case of strong winds, rain, thunderstorms and other special weather, should not be scaffolding removed. Implementation of demolition work at night, you should have good lighting. 4. All high operating staff Fuzhou scaffolding company, should be strictly enforced removal process requirements and compliance with safety discipline by high operating regulations. 4) take any stand face heightened measures to increase the load, the raised portions no reliable fixed, stable, protective equipment nor the corresponding heightening; 5) standing do not have to manipulate the conditions of rail or single board manipulation; 6) the erection and dismantling of the job does not require the use of security products; 7) in the scaffold as support and Rachel's support, did not use appropriate measures to strengthen the framework; 8) in the frame member and the handling were overweight installation operations; 9) in unsafe weather conditions (wind more than six days, thunderstorm days) to continue construction mobile scaffolding Fuzhou, Fuzhou Mingguang Scaffolding (certification), the scaffolding provided by the Fuzhou Mingguang steel frame construction engineering Leasing Corporation. Fuzhou Mingguang steel frame building works Leasing Co., Ltd. (www.fzmgjsj.com) is Fuzhou, a leader in site construction materials, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In Fuzhou Mingguang scaffolding leadership with the staff warmly welcome all inquiries negotiations to create Fuzhou Mingguang scaffold better future.